Still Struggling
I just can’t get fans to spin via Sim Hub
I have followed every setup videos for the PWM option and Wind and both but nothing
I am at a total loss as to why it is not working
3 different Unos (genuine)
5 different Motor Shields
I have signal when testing but no output to the Motor shield
I have enough power to run the fans (removed the jumper) and using a 12v 2 amp Power Supply
I did notice in the Shake It Motors Tab it shows all channels are in use?
I realize it is difficult to ascertain my issue through limited information other than the setup followed a least 4 different setups on Youtube (and all of those worked for the Youtubers) but please chime if you you can offer any options I can try.
Thanks for any help.
I did it some years ago. I followed the simpit tutorial and bought the parts at Aliexpress. I remember one of the wires was inverse, I mean the colors. But it worked.
And last year I remember even after simhub update, especially the layout it also worked.
Tell me if the img link works.
Checking my posts, I also had to find the correct driver. Check my post: https://www.simhubdash.com/community-2/postid/4801/