Hi Guys simple question :
Does the Arduino UNO R4 MINIMA is compatbile with SimHub ?
Chip RA4M1. there is not this board in simhub when i try to transfer the sketch, then got the orror
avrdude.exe: stk500_recv(): programmer is not responding
avrdude.exe: stk500_getsync() attempt 10 of 10: not in sync: resp=0x70
Have you any tips ?
thanks
i also have the arduino rev 4 and i get following errorcode as soon as i try to upload the sketch and it says not in sync,i can put other sketches on the board witch work and upload to the board>so it connects >but not in simhub...hope this issue cqn be resolved and keep you updated if we find a sollution>
Arduino: 1.6.13 (Windows 10), Board:"Arduino/Genuino Uno"
De schets gebruikt 10.180 bytes (31%) programma-opslagruimte. Maximum is 32.256 bytes.
Globale variabelen gebruiken 612 bytes (29%) van het dynamisch geheugen. Resteren 1.436 bytes voor lokale variabelen. Maximum is 2.048 bytes.
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x39
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x39
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x39
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x39
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x39
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x39
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x39
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x39
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x39
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x39
Probleem bij het uploaden naar het board. Zie removed link voor suggesties.
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
this is the errocode i get