Is possible renumbe...
 
Notifications
Clear all

Is possible renumber the channels

5 Posts
4 Users
1 Reactions
1,025 Views
(@davidevr)
Active Member
Joined: 2 years ago
Posts: 3
Topic starter  

Hi all,

I have 2 nobsound amps with 4 channels total to drive 4 bassshakers.

I Need to reassign the channels of the second amp in Channel 3 and Channel 4. Is possible?

Thanks


   
Quote
(@chris99)
Eminent Member
Joined: 3 years ago
Posts: 18
 

Hi

I'm also interested to know this before buying another amp.

Just a thought, under the Sound Output tab - Custom Channel Map, can you not just enable  both 2 channel sound cards and use channel 1 and 2 for each card as they are separate cards and effectively give you 4 separate channels, or is there a conflict? 

 

 

This post was modified 2 years ago 3 times by chris99

   
ReplyQuote
(@davidevr)
Active Member
Joined: 2 years ago
Posts: 3
Topic starter  
  1. @chris99 hi i made It and work with 2 noob amps via usb. You can use the separate volume channel map, there Is not conflict between the Channel of the 2 amp. The only limitation Is that the hertz of Channel 1 It Will the same for both idem for the Channel 2

   
chris99 reacted
ReplyQuote
 RonS
(@rons)
New Member
Joined: 1 year ago
Posts: 2
 

Not sure if I am allowed to ask a question but here goes.  I am trying to use two Nobsound amps.  One amp drives two bass shakers and the other amp is to drive 1 bass shaker.  Problem is that when using the second Nobsound there are considerable freezes when I test output or try to change effects, etc.  When it does finally start up the game all is well until I need to use a keyboard command such as "Exiting" the game.  There seems to be no way of exiting or changing views short of turning the PC off and restarting.  I read about people using two Nobsounds but I believe the second one is causing conflict. I would sure like to get some advice from someone using two usb amps.  Thanks for any help.


   
ReplyQuote
(@jamesstandford)
New Member
Joined: 1 year ago
Posts: 1
 

Posted by: @davidevr

Hi all,

I have 2 nobsound amps with 4 channels total to drive 4 bassshakers. geometry dash lite

I Need to reassign the channels of the second amp in Channel 3 and Channel 4. Is possible?

Thanks

I think it is possible

 

This post was modified 1 year ago by jamesstandford

   
ReplyQuote
Share: