Hi guys i have the Nextion 4.3 Display with FT232R TTL having issue to connect with simhub. when i connect everthing together i just went to simhub to set up the display but even on auto settings it's like its not reading nothing from it. the screen is just saying the product plan and sometimes it will restart itself. i have attached a link to show you whats it saying. but i wish some help form someone to set this up pls. thx
Hi !
If you can't upload the design it means something is wrong with the adapter. I would ensure the wiring is correct (it's a common mistake to improperly connect TX and Rx : https://github.com/SHWotever/SimHub/wiki/Nextion-Display#wiring-nextion-display-using-an-usb-ttl)
On another hand make sure to install the drivers for your adapter chip. Ft232rl drivers does not comes out of box on windows (but is often installed by many apps)
A last clue is that the screen is restarting, it should never happen as long as it stay connected, it feels like there could be a powering issue (defective usb TTL, bad cable, insufficient usb hub ...)
In all cases if you can't get past the template upload (as described in the template install guide :Installing-an-'editor'-template) through the manufacturer editor, it means it won't work with simhub, so this needs to be solved before all.
Let me know if it helped,
Nicolas
Hi Nicolas
Thanks for your reply. i manage to work it out. but the ting is to work it i had to download Nextion editor. it like to kind of work it you hvae to edit it with this program not simhub only. still have some problems to change this display settings on it.as my friend helped me out of it cause i dont know more on this technical stuff unfortunate.
Hi terence, i'm having the same issue, can you please tell me how did you managed to get it to work? thanks