Hi ! Both of them requires a configuration, you can read instructions here :/p>

Hi !You can find instructions about how to change this frequency here :br />Nicolas

Hi ! Unfortunately there is no data given in telemetry, only the configured levels.

@romeo25ah that's stange I don't know from what this picture is from, but indeed the direction can vary depending of how the sketch is written, I adde...

@romeo25It's a good sign,Have you checked the output polarity ? The adafruit test sketch alternate both directions so the fan will always work, but si...

Hi ! Com1 is usually the motherboard serial port, you probably miss the Arduino drivers in your new installation :/p>

Aida64 requires another driver but it's a good test indeed here is he link for the aida version of the driver :(once installed simhub won't recognize ...

Hi ! Hum it looks like communication issues, could you try with another usb port/cable ? And if you use some usb hubs avoid it, i've inspected the pic...

Hi ! Did you gave them unique names ? So each one can be recognised as a unique device:br />Nicolas

Hi ! No it will require some "plumbing" inside simhub. I just need to find a trick about the fact that only a few cars supports it to avoid false expe...

Hi ! Your fans products page does not specify the amps required, but yes motorshield have a limit Adafruit motor shield V2 is rated for 1.7A (up to 3A...

Hi ! The effects shown in the output list are only the one added in the profile, you probably don't have them yet in it, you can add it from the effec...

Hi ! There is no visible UI setting for this however you can edit DashStudioSettings.json (available in C:\Program Files (x86)\SimHub\PluginsData\Comm...

Hi ! The error means the Arduino serial chip is failing, what kind of fans are plugged ? Does they matches the motor shield power capacity ? This coul...

Hi ! Lot of them, Typically, Truckmodel Speed Rpm Maxrpm Gear Maxgears Suspensions data (position, velocity ...) Wheel speed Wheel slip ...