Hi ! Motion wasn't a goal of simhub so only Yaw pitch roll are extracted in a cross game way. I plan to work on proper motion support by the end of th...

@jastool Ah if you use only the usb power you will probably reach easily the limits, usb3 may give you some additional room (assuming it accepts to de...

Hi ! Have you tried to follow the troubleshooting guide ?? It gives a series of additional advices, about VPN services, changed ip, etc.. Let m...

Hi ! At first sight I would think about a powering issues, what power source are you using ? In order to test that theory could you try to set the ...

Hi ! Unfortunately what you are trying to do is not possible, simhub only supports one opponent style and you can't make it dynamic per opponent.About...

Hello ! You can use any sharing systems, google drive, Mediafire, dropbox, that will be fine for me 😉

Could you send a picture of your wiring ? If you can't make the fan goes faster and you have followed conscientiously the process I linked. It makes m...

Hi ! Concerning flight sims in a general manner, it will come later.Currently Simhub is highly "race simulator" oriented, and properly supporting fl...

Hi ! If you can upload but can't connect it make me think about a defective motor shield or a short. You can test it easily by simply unplugging the s...

I've detailled the process here :br />Let me know 😀

Hum ! That's strange indeed, I just ckecked witch pcars2 and I had no particular issues, could you share my your button box so I can check ?

Hi ! Which game are you using ? For instance AC needs to enable keyboard inputs in game settings in order to mix controllers and keyboard. Also depend...

@pinball_wizardExactly !

Hi ! No hc05-06 would not allow GamePad support, and it has a huge latency. That's why I have not implement it for any kind of usage, it's definitely ...

Hi ! When you say ground connected, the power supply ground is correctly connected to the Arduino too ? it must go to both the fan gnd and the Ard...