@benag Does simhub is properly connected ? The buttons and encoders won't work correctly when simhub is not connected to the arduino. Nicolas

Yes that's the purpose of the setup tool 😉 you will find the Arduino sketch configuration steps here : //github.com/SHWotever/SimHub/wiki/Arduino--Se...

Hi ! If you are using bare encoders (with no resistors) make sure to enable the pullup option in the sketch setup ;)Nicolas

Strange, what is plugged on it ? Could you make sure baudrate is set to 115200 it's the default value which is safe with all arduinos Maybe a dumb q...

Hi !You will find console instructions here :br />Nicolas

Hi ! No it's not possible unfortunately, I've been fighting with itead (which produces the nextion screens) and they refused any kind of interoperab...

Hi ! It's not planned at short/middle term you can see my complete explanation here :br />Nicolas

Hi !I'm sorry, the Simhub replay feature is not time synced, it's intended to be able to easily test and tune all the simhub features when out of the ...

Hi ! You can find version history here :do not hesitate to send me the logs (see bug reports) Even if I don't plan to support actively windows 7 any...

Hi ! Sound cards Color code mostly refers to 5.1 setup, in the case of Simhub you will be using channels in raw order following the current configurat...

Hi ! Unfortunately no, simple leds are not supported for this reason : (see chapter 10) But RGB leds are easy to use, three wires and that's it 😉 An...

Hi !Do not hesitate to create a ticket as shown here : joining the dash (or only the guilty part) so I can take a look ;)Nicolas

A short video of the test : As you can see it speed starts to change a bit late (~16% for this particular fan) then progressively raise, I had to stop...

@ruination83That's really strange indeed,I've just checked again with the two PWM fans I have under hand cooler master "MasterFan 120AB fan" (stop cap...

Minimum speed will indeed reduce the variation between low speed and high speed, but it will reduce the contrast too. Threshold would make it worse as...