Catch you on Discord — and thanks for understanding!
Last seen: Apr 28, 2025
Hi ! If you are running an old version of simhub you won't get automatic configuration working for vr version, make sure to update simhub first. If it...
Hi ! The nextion micro bridge will only work with an Arduino micro, the nano doesn't have the required capabilities. You can read the two possible wir...
Hi ! Unfortunately such kind of hardware would be extremely specific and a bad candidate for out of box support for simhub considering how rare this k...
Hi ! This is inherent to the technology of the shield (based on pwm or "pulses") You can tune the frequency quite easily at upload : For fans you c...
Hi ! I checked the template and I've seen no issues yet, have you configured this part ? I've only checked the 4.3 do not hesitate to tell me preci...
Hi ! If you can't upload the design it means something is wrong with the adapter. I would ensure the wiring is correct (it's a common mistake to impr...
Hi ! I will check that, I got already similar reports but nothing I could reproduce yet. In parallel could you check with simple headphones? Jack to ...
Hi ! It's not possible built-in as it's handling texts exclusively, but with a bit of ncalc it's possible exemple : if(changed(750, [DataCorePlugin.Ga...
Hi ! Yes it's possible, it's the 3rd link in the nextion section :/p> Nicolas
Hi ! It's not possible yet, but since it requires custom characters to be loaded in the screen (slots are limited) it's clearly hard to make this and ...
Hi ! You simply need to uncompress both files coming from the downloaded zip in the same folder before starting the installer. This simply happens whe...
Hi ! Arduino clones are fine, about the motor shield it's ok too, but I would avoid this particular model due to it's lack of power. You can read abou...
Hi ! It's not possible yet as SimHub is mainly focused on PC usage where all controls are available natively. I know that the F12019 api gives access ...
Hi ! It's supported out of box for any rotation which could be required 😉 Nicolas
Hi ! Thanks for the feedback. I will fix it for the next version. Nicolas