Thanks a lot ! Lot of coffees 😉 The unfair advantage philosophy is something I've read a few times, I can't remember where to be honest , but it expl...

Hi ! You won't find it unfortunately. Such data is not available from iRacing as it's considered as an "unfair advantage" by iRacing developers. I wou...

Hi it's better not to mix shields and direct connection as they may not work correctly together. Since the Uno can only drive two pwm fans ( one optio...

Hi ! Unfortunately this symptom is typical to a faulty shield, the good test is to simply remove the shield and but still enable it during the sketch ...

Hi ! Yes it's possible :/p>

Hi ! "Dout" stands for data out, do not hesitate to take a look to the official wiki, you will find warnings about these kind of mistakes ;)/p>

Ouh, that's ugly indeed, the data seems to flow correctly, I would look for power issues (the screen is brighter and larger, so it consumes a bit more...

Hi ! We debated these security questions with the moderation team yesterday, this is a really tought question, Should compromised accounts be trusted ...

Hi ! The number of channels available is driven by windows configuration and/or driver, you need the set it in 2.1 here so simhub can see all the chan...

Another thing, I would avoid the pin "12", it's the pin with board integrated led, it might interfere with the display communication.

Hi !I just tested the sketch and i've not seen issues, my best bet based on that,So I see two possibilities :- Pin ordering : The order defined in the...

Hi ! You can assign controls for that 😉

Hum, that's really weird, does uploading directly from the arduino IDE works, could you try just with an empty sketch to know if the arduino itself is...

Hi ! That's not something i've encountered yet, this could be a strange timing issue where the arduino resets faster than usual, i've made a patch whe...

Hi ! There might be a confusion, ABS and TC active (unlike configured "level") have never been available in Assetto corsa telemetry, but it's availabl...