When I first set it up with sim hub after proving the l298p was working with DC motors SimHub’s sketch made the sounder go off constantly with and one...

I’m in Australia so middle of the day here guess your in England where I’m from

How mine is wired with Transformer connected to L298p  image.jpg

See attached  C4657761-68AB-48FD-9798-E9C87D3DB10A.png

I know it might sound silly but is the other motors polarity correctly terminated . Guess you have already checked that .

both test codes are to work with dc motors ( Fans)

Found it this is the test I used to confirm the board is working int E1 = 10; int M1 = 12; int E2 =11; int M2 = 13;void setup() {pinMode(M1, OUTPUT)...

paste paste the below into your Audrino library ( that was a learning curve aswell trying to set thst up and making a program run it’s a bit clunky ) ...

@davido996 you sound like me I couldn’t let it go it drove me mad and I’m a complete beginner aswell plus bad eye sight which is age related 😂Good lu...

@john-biggs Did you try a test sketch for DC motors before to see if your L298P is working with both fans ( I picked one up off a company that was ...

I got the L298p to work with my VERY limited knowledge COMBINED WITH AN Arduino uno R3 but is did take about 20hrs of trial and error with an adafruit...

I have the same problem but when i apply your recommended settins it just makes the sounder go on constantly and no fans at all? any chance anyone c...

Ive got exactly the same problem and followed boosted medias video to a T and i have also replaced both arduini and ada fruit boards INCASE THERE WAS ...